• Dr. Dabbles
    link
    fedilink
    English
    661 year ago

    Right, nearing mass production is what we call it when their PR department announced just a couple weeks ago that they’re delaying the project until 2025, and they’ve been working on it for a decade.

    These posts need to stop. Their only purpose is to lead gullible people on while the company desperately wishes for a magical fix to all their problems.

  • @fuckwit_mcbumcrumble@lemmy.world
    link
    fedilink
    English
    621 year ago

    I’ll believe it when it’s actually in production. Toyota has been making claims about this for a long time now and it always seems to be “just a few years” away.

    • dual_sport_dork 🐧🗡️
      link
      fedilink
      English
      101 year ago

      That’s where I am, too. We’ve been hearing that fully practical electrification of transportation is Just Around The Corner! since the '90’s. I’m still waiting for it to actually happen.

      But I’m ready. Bring it on already.

      On the bright side, with several almost completely practical BEV’s on the market already we’re much closer than we’ve ever been.

      • @frezik@midwest.social
        link
        fedilink
        English
        1
        edit-2
        1 year ago

        Thing is, if you’re willing to go down to a Geo Metro type of car, BEVs would have been easily viable quite some time ago. Safety demands (for the passengers, not pedestrians) have made it impossible to remake anything like the Geo Metro, and general market trends have pushed cars even bigger and heavier. Meanwhile, we’ve increased pedestrian deaths with all these huge cars.

        One of the biggest problems in the BEV market right now isn’t the technology, but that manufacturers focused on gigantic luxury SUVs and trucks first.

    • Bernie EcclestonedOP
      link
      fedilink
      English
      21 year ago

      Yep, thankfully there’s more manufacturers trying to make it work. Samsung sounds promising

      Other companies have also made progress recently. Chinese battery maker CATL revealed it was preparing to mass-produce its semi-solid batteries before the year’s end, while South Korea’s Samsung SDI has completed a fully automated pilot line for solid-state batteries.

  • @AlternateRoute@lemmy.ca
    link
    fedilink
    English
    311 year ago

    Toyota president Koji Sato also admitted that production volumes of solid-state batteries were likely to be small when the company rolls them out in electric vehicles as early as 2027. “I think the most important thing at the moment is to put out [the solid-state batteries] into the world and we will consider expansion in volume from there,” he said.

    SOOOOO not really close… another press release hyping this up. How small is SMALL? Hundreds?

    They clearly are still having trouble scaling production of this technology. It has EXISTED for some time but isn’t of use to cars if they can’t make hundreds of thousands of them.

    • metaStatic
      link
      fedilink
      21 year ago

      they’re using the promise of better batteries to make people reconsider buying full electric vehicles now. I expect it to be exactly like fusion, always a few years away.

      • @Bjornir@programming.dev
        link
        fedilink
        English
        41 year ago

        Commercial fusion is not a few years away, and I’ve never seen the claim apart from deranged individuals on Twitter. If everything goes to plan, commercial fusion won’t be here for a few decades.

        What the claim may have been is experimental fusion, which does exist right now, we have generated power using fusion, and we even made more power than we put into it recently. It’s moving, but it’s slow, as planned for the last few decades.

        • @frezik@midwest.social
          link
          fedilink
          English
          21 year ago

          And even that “more power than we put into it” comes with a big asterisk. The power being output by the laser is smaller than the power being output by fusion. Big lasers tend to be grossly inefficient things. We’ll need at least 10 times the output in order to generate enough to power the laser. That’s not even considering the power usage of the facility around it.

          So, yeah, we’re at least a few years away from enough power for the laser to sustain itself, at least a few more to be able to run the facility and still have net power, and then at least a decade after that to get to commercialization.

    • Dr. Dabbles
      link
      fedilink
      English
      01 year ago

      Not even a press release, but an FT post. Which is worth less than a press release somehow.

  • @SkyNTP@lemmy.ml
    link
    fedilink
    English
    27
    edit-2
    1 year ago

    As far as electrification goes, Toyota is virtually at the bottom of the list of car manufacturer . I’ll see it when I believe it.

    • @AA5B@lemmy.world
      link
      fedilink
      English
      151 year ago

      F.U.D. Fear, Uncertainty, Doubt. A favorite tactic of IBM, then Microsoft, now Toyota. If you can’t compete, announce an upcoming “breakthrough” so customers will delay purchases from competitors

      • @Acters@lemmy.world
        link
        fedilink
        English
        11 year ago

        Truth, these type of announcements are meant to instill a sense if something better is coming if we just wait. It’s a honest strategy if there is truly something in the works but right now a lot of misinformation is just making it an bad strategy to use.

      • @tony@lemmy.hoyle.me.uk
        link
        fedilink
        English
        11 year ago

        Yeah with car manufacturers the usual tactic is ‘concept’ cars of ‘the next model’ containing every single thing a consumer could wish for… which of course never get built.

        • @AA5B@lemmy.world
          link
          fedilink
          English
          11 year ago

          Pontiac Aztec was the worst ever. The concept was so cool and they claimed almost ready for production. It would have been YUGE! …… then somehow they released a completely different disaster of a vehicle that is now part of history as one of the worst ever

  • @AA5B@lemmy.world
    link
    fedilink
    English
    121 year ago

    Wtf is this linked to? A good dozen tries and I can’t pass the captcha? Am I just a sentient robot who is unaware or this a mechanical Turk thing where I’m helping some bot pass l

  • @NeoNachtwaechter@lemmy.world
    link
    fedilink
    English
    4
    edit-2
    1 year ago

    Problems include the extreme sensitivity of the batteries to moisture and oxygen, as well as the mechanical pressure needed to hold them together

    Not quite the ideal thing to have in a real world car. For example, what happens after a little accident leaves an opening in the hull of such a battery? Or creates some more pressure than needed here and there?

          • Dr. Dabbles
            link
            fedilink
            English
            -11 year ago

            The electrolyte isn’t the only flammable material in lithium cells.

            • Bernie EcclestonedOP
              link
              fedilink
              English
              01 year ago

              No, but it’s the difference between solid state and lithium cells. There’s still a fire risk with solid state, but then there’s a fire risk with ICE. It just needs better engineering like they’ve done with current ev batteries

              • Dr. Dabbles
                link
                fedilink
                English
                01 year ago

                That isn’t what’s being discussed. We’re comparing cells to cells, not ICE to BEV.

    • @Kazumara@feddit.de
      link
      fedilink
      English
      91 year ago

      One with a fluid electrolyte. That includes current Lithium-Ion and Lithium-Polymer batteries, as well as the older Nickle-Metal Hydride and Lead-Acid batteries.

      • That Dutch guy
        link
        fedilink
        English
        61 year ago

        I was unaware that a lithium battery was liquid.

        TIL, thank you, kind Lemmer.

        • @Skyrmir@lemmy.world
          link
          fedilink
          English
          21 year ago

          Liquid in the scientific sense, it’s more of a paste. Lithium hexafluorophosphate(aka LiFPO) mixed with Dimethyl carbonate or Diethyl carbonate which are just there to float the Lithium between the plates without letting it burst into flame from any humidity that might happen to reach in.

        • fuzzy_feeling
          link
          fedilink
          English
          21 year ago

          If you puncture one with a nail or something, you can see the liquid drip out… /s