How many PSUs are installed in the Poweredge server? In the manual it says it could be 1 or 2 and the power per PSU could be 1100W so if it is 2 * 1100W then that could explain why the UPS has problems with it.

Check out their road map and the videos of their prototypes. It is very much not a tech bro project :). The first goal isnt event maglev but magnetic propulsion.

If you want to go faster you want to go contactless which means building a whole new, incompatible, network.

retrofitting and hybrid operation seems possible though: https://en.wikipedia.org/wiki/Nevomo
they already built a small working prototype

NetworkManager’s Gnome GUI works with wireguard config files. If you are using Plasma you would need to install some alpha software to do that in the gui but you can always fall back to nmcli which also supports wireguard configs via the import command.

Just to expand on the smartctl bit: you can totally use smartctl with some RAID controllers!
See here for examples / supported cards: https://www.smartmontools.org/wiki/Supported_RAID-Controllers

a better than usual split for some families

That is exactly what counts as credit in this case, because this split is made possible by some other families crediting the bid. Basically writing “i dont want this money give it to someone else” on a figurative piece of paper and bidding with that instead of cash.

isnt the name of one of the hl2 maps “little odessa”?

You are technically correct in saying that it’s not a registration. Instead it’s a sponsoring: https://en.wikipedia.org/wiki/Sponsored_top-level_domain

There is a limit on the spacing of the colour bands though. If you want colours then you have to hit the spots where the correct phosphors are and this limits the usable resolution.

So it still uses a MSDOS partition table, interesting. This usually only happens on systems that do not support EFI at all.

Is your BIOS and main board fairly old per chance?

Ok, that looks like a fairly standard setup. I guess taking a look at the boot loader itself would be the next step. When you see the Debian bootloader you could try pressing ‘e’ to view what commands it uses internally to boot. The lines starting with “linux” and “initrd” would be most interesting.

Hi, it would be useful to know what kind of device you are installing on. For a laptop the model and make would be especially useful. If it is a PC then the drive configuration would be interesting (what kind of drive, how many etc.)

If they are all installed in the same wine prefix you could back up everything in one go by archiving the “.wine” folder in your home. that will include all applications installed in wine and all settings for those applications.

if you want to separate them into one archive per app you should look into wine prefixes, otherwise you would need to identify every folder a given app created during installation and archive those together manually, which can be very tedious.